ELI43-CP
User’s Manual
02/13/17
Copyright ©2017, Future
Designs, Inc.
Page
5
of
12
Your ELI Experience
Share your experience connecting ELI devices to various (single board) computers at:
http://www.teamfdi.com/edid/#edidform
.
2.0
ELI43-CP Box Contents
•
ELI43-CP
3.0
Optional Accessories Recommended for Use (Purchased Separately)
•
12V DC (+/- 5%) 2A Power Supply with a center positive barrel plug
o
2.1mm I.D. x 5.5mm O.D. x 9.5mm (All ELI units operate from +12V DC so this is the recommended power
supply input voltage for the entire Family. ELI43-CP units from Rev 3.0 and greater are also capable of operation
from a range of +5 to 24V DC (+/- 5%)
•
USB Type A to Mini Type B Cable (For touch)
•
HDMI Cable (Type A Male)
4.0
ESD Warning
Figure 2. Electrostatic Sensitive Device
Our ELI units are shipped in a protective anti-static package. Do not subject the module to
high electrostatic potentials. Exposure to high electrostatic potentials may cause damage to the
boards that will not be covered under warranty. General practice for working with static sensitive
devices should be followed when working with this device.
5.0
Determining the Revision of your ELI
All ELI units have a label on the board to identify the part number and revision. An example of an
ELI label is shown below.
ELI Part Number ELI Revision Number
