FUTABA GYA553, Setting Manual

Page: 5 / 15

5
*It is not possible to write the data
of the CGY heli gyro to the data of
the GYA553 gyro.
* G P B -1 c a n s e t t h e s e r vo
parameters by connecting the
S.BUS / S.BUS2 servo and
the battery to the Gx port with
a 2-way hub.
*GPB-1 can only save the data for
the last loaded one model.
:KHQ*3%VWDUWVXSZLWKSRZHURQWKHRSHQLQJVFUHHQLVGLVSOD\HG¿UVW
Opening Screen
GYA553 Home Screen
[ /+] Press and hold
[ /+] Press
[Enter] Press and hold
[Esc/Page] Press and hold
[Esc/Page] Press and hold
[Enter] Press
[Enter] Press and hold
Using it for the first time or if the heli Gyro CGY
data is loaded in GPB-1, change to GYA553 with this
procedure.
This step is skipped when using with GYA553 from the
second time onward.
Opening Screen Opening Screen
* If Gyro is not connected to GPB-1, press and hold the
Enter key from the opening screen to move to this screen.
Press the Enter key, the GYA533 setting data
saved in GPB-1 is displayed.
WRITE screen SBUS SERVO screen
Read the setting data of the connected
GYA553 into GPB-1 and save it.
Write the current setting data
of the GPB-1 to the GYA553.
Parameter setting menu
for S.BUS servo.
CAUTION
Since the data of GYA553 or GPB-1 is rewritten each power up,
always check the operation key.