14
Bef
ore Using
Stick Lever Head Adjustment
The length of the lever head of the steering and throttle sticks can be adjusted.
Adjustment
1
Unlock lever head “A” by tur ning it
counterclockwise.
2
Adjust the head to the length best for
you, then lock the heads by turning
lever head “A” clockwise and lever head “B”
counterclockwise.
Lever head
“A”
Modification To Ratchet System
When modifying the throttle stick from self-neutral system (factory installation) to
ratchet system, use the accessory parts to change the system.
Modification
1
Turn off the power to the transmitter.
2
Remove the four transmitter rear case
screws and remove the rear case.
3
Disconnect the battery connector.
4
Remove the swing arm and spring. This
frees the throttle stick.
5
Install the accessory ratchet plate with
the screw.
6
At the end of modification, connect the
battery connector and close the rear
case.
Lever head
“B”
Swing arm
and spring
Ratchet plate
and screw
Swing
arm
Ratchet
plate
