22
Throttle Fail Safe
（
F/S
）
This function moves the throttle servo to a preset position when the receiver cannot
receive the signal from the transmitter for some reason.
When the signal from the transmitter can be received again, this function automatically
resets.
*For gasoline engine cars, it is recommended that the fail safe position be set to the direction that
applies the brakes.
The contents of the currently selected model data can be copied to another model.
※
S-FHSS
→
Only 3.8V(Not change)
FHSS
→
Not battery F/S function
Example
NiCd/NiMH 4 cell
→
3.8V
NiCd/NiMH 6 cell
→
4.4V
LiFe 2 cell
→
4.8V
LiPo 2 cell
→
5.6V
It depends on your
receiver battery.
Throttle trigger to
the desired position
Push the
－
key
Push the
＋
key
→
F/S OFF
F/S Position
Throttle idle or brake
position
F/S position setting
Battery F/S position setting (Only T-FHSS)
Key
Push the
－（
Minus) key while
operating the throttle trigger
to the desired position.
Setting example:
Throttle
idle or brake position
OFF: Inhibited
3.8V-7.4V
Voltage change
ABS
ABS Cycle Speed
OFF: Inhibited
FST: Active (fast)
MID: Active (middle)
SLW: Active (slow)
ABS function
ABS change
This function simulates a full size
car's antilock braking by pulsing
the brake on and off rapidly. Model
stops as rapidly as possible without
skidding.
•The cycle speed can be selected from FST/
MID/SLW.
Model Data Copy
（
COPY
）
The top (current
model) is chosen
with the steering.
Move (right or left)
the DT1 about 1
second.
Copying
Select the
current model
numder with the
(+) or (-) key.
Select the
destination
model numder
with the (+) or (-)
key.
The bottom (desti-
nation model) is
chosen with the
steering.
Selection of copy model data
Model copy execution
Model copy complete
Summary of Contents for 3pv-2.4g
Page 1: ...R 1M23N31504 ...
