background image

General Operation 

POWER ON/OFF 
Press the power ON/OFF button (16) 

FRONT PANEL RELEASE 
Press OPEN button (8) to open the front panel

SOUND ADJUSTMENT 
Press the SEL/MENU button (17) repeatedly to cycle the audio mode through bass, treble, balance and fader modes. Press the 
VOLUME UP button or VOLUME DOWN button to adjust the selected mode.

Bass Treble  Balance  Fader

SETTING THE CLOCK 
Press the DISPLAY button once to switch to display clock, 
then press and hold the DISPLAY Button until the clock is 
displayed and flashes. Press the       button to change the 
minutes and the        button to change the hours. Press 
DISPLAY button to confirm and exit.

MUTE 
Press MUTE button to mute the sound. Press again to 
resume.

LOUDNESS 
Press and hold the  BND/LOU/ENT button (10) to reinforce 
the bass output. Press again to cancel.

MODE SELECTION  
Press the MODE/SW button to cycle through the source 
modes. Only active modes will be displayed. Eg. If there is 
no CD loaded CD mode will not be selectable.

SUBWOOFER LINE OUT 
Press and hold MODE/SW button (11) to activate the 
Subwoofer output. Repeat to deactivate

005

GENERAL OPERA

TION

EQUALIZATION  
Press the EQ button repeatedly to cycle through and select 
the EQ option you desire.

ESP 
Electronic shock protection provides a 10 second read 
ahead buffer.

RESET BUTTON 
The RESET button is located in the housing of the unit 
button (26) and must be activated with a ballpoint pen or 
something similar under the following conditions. 
1. 

An error symbol is displayed 

2. 

Function buttons do not operate correctly

Button Description

1. 

   /    Play/Pause 

2. 

SCN (track preview)  

3. 

RPT (Repeat) 

4. 

SHF (Shuffle) 

5. 

DIR 

-   

6. 

DIR 

+    

7. 

DISPLAY 

8. 

     OPEN 

9. 

MON -Mono/Stereo 

10.  BND/LOU/ENT 
11.  MODE/Sub Woofer 
12.  EQ (Equaliser) 
13.  Mute 
14.       (Eject) 

15.  LCD Screen 
16.       Power ON/OFF 
17.  SEL/MENU 
18.  Volume Up 

+ 

19.         Rewind 
20.  Volume Down 

- 

21.         Forward 
22.  USB/AUX 3.5mm Socket Interface 
23.  AS/PS - Auto store preset scan 
 

iPod Menu 

24.  Preset Station Buttons (1-6) 
25.  Disc Slot 
26.  Reset button 

004

BUTT

ON DESCRIPTION

25 26

1

6

22

24

2

7

21

4

8

20

19

3

23

16

18

17

13

12

10

15

11

5

9

14

Summary of Contents for MS-CD80









Reviews: