Muting all Connected Stereos
You can quickly mute the audio from this stereo or from all stereos connected to the Fusion PartyBus network
(
).
1
From any source, press .
The mute symbol appears and audio from this stereo is silenced.
NOTE:
If the stereo is part of a group, the audio from all grouped stereos is silenced.
2
Select
MUTE SYSTEM
.
Audio from all connected stereos is silenced.
3
Select
UNMUTE SYSTEM
.
Audio is restored to all connected stereos.
Adjusting the Subwoofer Level
You can adjust the subwoofer level for each zone.
1
Press the dial, and select a zone with a connected subwoofer.
2
Press and hold the dial.
The SUB LEVEL adjustment for the zone appears.
3
Adjust the subwoofer level and press the dial to set it.
Adjusting the Tone
1
Select
>
AUDIO
.
2
Select the zone to adjust.
3
Press the dial to select a tone.
4
Adjust the tone level and press the dial to set it.
You can drag the slider bar to adjust the tone level.
Disabling the Loud Setting for a Zone
The LOUD setting maintains frequency response at low volumes and increases perceived loudness at high
volumes. This setting is enabled by default in all zones.
1
Select
>
AUDIO
.
2
Select a zone to adjust.
3
Select
LOUD
to clear the check box.
Adjusting the Gain for an Auxiliary Device
You can adjust the gain for a connected auxiliary device to achieve a volume level similar to that of other media
sources. You can adjust the gain in 1 dB increments. You can also adjust the gain for digital sources using an
optical audio connection.
1
Select an auxiliary source.
2
Select an option:
• To increase the gain, select
.
• To decrease the gain, select
.
NOTE:
To achieve the best audio quality when using a portable media player with headphone output, it may
be necessary to adjust the volume control on the media player, instead of adjusting the gain.
Speaker Zones
You can group speakers in one area into a speaker zone. This enables you to control the audio level of the
zones individually. For example, you could make the audio quieter in the cabin and louder on deck.
You can set the balance, volume limit, tone, subwoofer frequency, and name for each zone, and configure other
zone-specific settings (
).
6
Audio Control
