3. SETTING UP THE EQUIPMENT
3-8
Menu Initial Setup (Data Damping)
Menu Initial Setup (Browser Installation)
3.3
How to Set up the Radar
If you have a radar sensor, set the sensor’s characteristics on the [Radar] menu. Open
the [Menu Radar] sub menus. Drag the main menu to select [Radar].
1. Select [Radar Source] on the [Menu Radar] sub menus, then select the radar type
connected.
Note:
If a DRS sensor is connected but does not appear in the [Radar Source] list,
close the list and open it again. The name of the DRS sensor should appear with
a check mark, as in the example below.
Menu item
Description
Options (setting range)
[COG & SOG]
Set data damping time. The lower the set-
ting the faster the response to change.
0 to 59 seconds
[Heading]
[Speed Through Water]
[Wind Speed & Angle]
[Rate of Turn]
Menu item
Description
Option (setting range)
[FAX30 Browser]
Show the Facsimile Receiver FAX-30 display.
[FA30 Browser]
Show the AIS Receiver FA-30 display.
[FA50 Browser]
Show the AIS Receiver FA-50 display.
