Furuno TECDIS, Installation Manual

Page: 77 / 80

TECDIS Installation Manual Page 76
Revision History
Revision 1.0 (13.05.2005)
•
Initial revision
Revision 1.1 (17.06.2005)
•
Illustrations updated
•
Wiring and signaling diagrams added
•
Hardware installation for auxiliary components added
•
Some updates to setup software description
Revision 1.2 (29.08.2005)
•
Equipment list updated
•
Compass safe distance instructions added
Revision 1.3 (05.01.2006)
•
Updated chapter 3.4, size and sensors. New choices: “backward (gyro-180º)” and “Raise
alarm if HDT1-HDT2 > 2.5º”
•
Updated illustrations in chapter 4.1.
Revision 1.4 (04.08.2006)
•
Chapter 3.2.1: Updated text. Port collision warning (case 69, 19.04.06)
•
Chapter 3.4: Updated text and illustrations. New function: shiphandle mode (case 53,
30.03.06)
•
Chapter 4.1: New function: time zone selection (case 98, 22.05.06)
Revision 1.5 (22.10.2006)
•
Chapter 3.2: Updated illustration
•
Chapter 3.2.6: Added description of RCU-018 ctrl field.
•
Chapter 3.4: Updated illustration
•
Chapter 3.5: Updated illustration
•
Chapter 3.6: Updated illustration
•
New Chapter 3.7 (Track Control)
•
Compass Safe Distance table on page 1 updated
•
Equipment Lists on page 5 updated
•
Installation Overview illustration updated
•
Specifications updated
•
Updated mounting section
•
Added mounting Chapter 1.3 Control Unit Furuno RCU-018
•
Added Chapter 2.1, HT405P4 Wiring diagram
•
Added Chapter 2.3, Processor connectors, HT405P4 TEL-A1
•
Renumbered chapters following 2.1
Revision 1.6 (30.04.2007)
•
Compass Safe Distances on page 1 updated
•
Equipment List on page 5 updated
•
Installation Overview illustration updated
•
Specifications for HT 405P4 on page 7 updated