Furuno TECDIS, Installation Manual

Page: 40 / 80

TECDIS Installation Manual Page 39
3.2.7 Supported NMEA Sentences
TECDIS supports communication with external equipment using the following NMEA
sentences, as specified by the NMEA standard and IEC 61162-1 (Ed. 3.0):
NMEA
sentence Description Send / Receive
ABK (AIS) AIS addressed and binary broadcast acknowledgment Receive
ABM (AIS) AIS Addressed Binary and Safety Related Message Send
ACK (AIS) Acknowledge Alarm Send
ALR (AIS) Set Alarm State Receive
APB Heading/Track Controller (Autopilot) Sentence ”B” Send
BBM (AIS) AIS Broadcast binary message Send
DBT Depth Below Transducer Receive
DPT Depth Receive
DTM Datum reference Receive
GGA Global Positioning System (GPS) Fix Data Receive
GLL Geographic Position – Latitude / Longitude Receive
GNS GNSS Fix Data Receive
HDT Heading, True Receive
MTW Water temperature Receive
MWV Wind Speed and Angle Receive
OSD Own Ship Data Receive
RMB Recommended Minimum Navigation Information Send
RMC Recommended Minimum Specific GNSS Data Send / Receive
ROT Rate of Turn Receive
RSA Rudder Sensor Angle Receive
RSD Radar System Data Receive
RTE Routes Send / Receive
THS True Heading and Status Receive
TTM Tracked Target Message Receive
VDM (AIS) AIS VHF Data-link Message Receive
VDO (AIS) AIS VHF Data-link Own-vessel Report Receive
VBW Dual Ground/Water Speed Receive
VHW Water Speed and Heading Receive
VSD (AIS) AIS voyage static data Send
VTG Course Over Ground and Ground Speed Receive
VWR Relative (Apparent) Wind Speed and Angle Receive
WPL Waypoint Location Send / Receive
ZDA Time and date Receive
NOTE: TECDIS also supports a number of proprietary protocols for specific application areas.
Contact your TECDIS supplier for details.