Furuno SCX-20, Operator'S Manual

Page: 19 / 86

1. INSTALLATION
1-9
4. Set the antenna unit on the roof mount kit so the bow marks for the antenna unit
and the roof mount kit base are aligned.
5. Turn the antenna unit assembly upside-down, then secure the antenna unit to the
kit base with the supplied three screws (M5

20).
6. Attach the supplied attachment gasket to the antenna cable. Apply the supplied
adhesive to top of the attachment gasket and then connect the antenna cable to
the bottom of the antenna unit assembly.
Note 1: When attaching the gasket to the antenna cable, take note of the direction
of the gasket referring to the figure below.
Note 2: Before attaching the gasket to the antenna unit, apply the supplied adhe-
sive (TB5211) to the top surface of the gasket, where it contacts the antenna unit.
Antenna unit
Roof mount kit base
Antenna unit assembly
Bow mark Bow mark
Bow mark
M5×20
(3 places) M5×20
(3 places)
Attachment
Gasket
Antenna
cable
Apply adhesive
the top surface.