Furuno RC-1800T, Installation Manual

Page: 15 / 35

1. INSTALLATION
1-9
1.9 SSAS Alert Unit (IC-307)
Select the installation location where the buttons on the IC-307 can be operated easily
in an emergency and is difficult to find by an intruder. Let the captain and the qualified
persons only know the installation location of the unit. For how to install the unit, see
the installation manual of IC-307.
1.10 AC/DC Power Supply Units (PR-300/PR-850)
The PR-300 and PR-850A supply both AC and DC power. Install the power supply
units outside the console considering the following requirements.
• Select a location where vibration is minimal.
• The location should be moderate and stable in both temperature and humidity.
• The installation location must be able to support the weight of the unit.
1.11 Other Equipment
1.11.1 LED flexible light (optional, max. 2)
Fasten the LED flexible light (NLFL-03WWB, max 2) on the top cover (left).
1. Remove four screws (M3) on the cover to
remove the cover.
2. Remove the bottom plate from the light assy. The bottom plate may be discarded.
Top cover (left)
Fixing location
LED flexible light (option, max. 2)
Fixing position
Cover
Light assy.
Discard this part
after removing.
Bottom plate
Light