background image

 

 

 

 iii

FOREWORD

A Word to the Owner of the PP-505 

Congratulations on your choice of the FURUNO PP-505 Printer. 
 
For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for innovative 
and dependable marine electronics equipment. This dedication to excellence is furthered by our 
extensive global network of agents and dealers. 
 
Your printer is designed and constructed to meet the rigorous demands of the marine 
environment. However, no machine can perform its intended function unless installed, operated 
and maintained properly. Please carefully read and follow the recommended procedures for 
installation, operation and maintenance. 
 
We would appreciate hearing from you, the end-user, about whether we are achieving our 
purposes. 
 
Thank you for considering and purchasing FURUNO equipment. 
 
The PP-505 prints a depth graph or a log consisting of date, time, depth, draft, latitude, 
longitude and heading. 
 
You can choose which to print with the [MODE] key. 
 
The main features are 

• 

Automatic operation; just turn on the power and the printer readies itself for printing. 

• 

Selectable printing interval. 

• 

LEDs show equipment status. 

Summary of Contents for PP-505





















Reviews: