Furuno PP-505, Operator'S Manual

Page: 2 / 20

i
SAFETY INSTRUCTIONS
WARNING
Do not open the cover of
the equipment.
This equipment uses high
voltage electricity which can
shock or burn.
Only qualified personnel
should work inside the
equipment.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Immediately turn off the power at the
ship's mains switchboard if water or
foreign object falls into the equipment
or the equipment is emitting smoke or
fire.
Continued use of the equipment can cause
fire, electrical shock or serious injury.
Do not place liquid-filled containers on
the top of the equipment.
Fire or electrical shock can result if a liquid
spills into the equipment.
Do not place heater near the equipment.
Heat can melt the power cord, which can
result in fire or electrical shock.
Do not operate the unit with wet hands.
Electrical shock can result.
Use the correct fuse.
Use of the wrong fuse can cause fire or
damage the equipment.
WARNING
ELECTRICAL SHOCK HAZARD
Only qualified personnel
should work inside the
equipment.
This equipment uses high
voltage electricity which can
shock or burn.
Turn off the power at the ship's mains
switchboard before beginning the
installation. Post a warning sign near
the switchboard to ensure that the
power will not be applied while the
equipment is being installed.
Serious injury can result if the power is
not turned off, or is applied while the
equipment is being installed.
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
CAUTION
PP-505 1.1 m 0.8 m
standard
compass steering
compass
Safety Information for Operator Safety Information for Installer