For MU-270W
[INSTALLATION SETTING] menu
The [INSTALLATION SETTING] menu appears only when the power is turned on for the first time
after installation.
[INSTALLATION SETTING] menu
For FMD-3x00 and FAR-3xx0 series, no adjustment is necessary. Keep this equipment in the de-
fault settings as below.
*: "DVI PWR SYNC" is the slide switch at the bottom rear of the monitor unit. See the “Slide switch”
below.
Slide switch
The slide switch is set to ON at the factory to allow for power control from external DVI signals. To
connect RGB or RGB and DVI signals, set the slide switch (located between the RGB and DVI
ports) to OFF. Otherwise the monitor will not turn on.
Connected
equipment
Connected
Unit
EXT BRILL
CTRL
SERIAL
BAUDRATE
COLOR
CALIBRATION
KEY
LOCK
DVI PWR
SYNC *
FMD-3x00,
FAR-3xx0 ser.
EC-3000
RS-485
4800
ON
ON
ON
INSTALLATION SETTING
EXT BRILL CTRL
SERIAL BAUDRATE
COLOR CALIBRATION
KEY LOCK
SAVED AND EXIT
RS-485
4800bps
ON
ON
YES
(OFF/DVI1/DVI2/RS-232C/RS-485/USB)
(4800/9600/19200/38400)
(OFF/ON)
(OFF/ON)
(NO/YES)
DVI port
OFF
OFF
ON (Default setting)
ON (Default setting)
Slide switch
Slide switch
Bottom rear of the monitor unit
