
8. INSTALLATION
8-8
8.2
Wiring
Connection of WAGO connector
Remove the WAGO connector from
each unit and connect each cable
core to the WAGO connector. See
the interconnection diagram at the
back of this manual. The terminal
opener is attached inside each unit.
Antenna Unit
HUB
External equipment
Rear of Display Unit
Junction box
Junction box
Ethernet
DATA1
DATA2
DATA3
DATA4
Junction box
24 VDC
CAN cable
Power
ANT-DN18WAPVC-300/400/500
30/40/50 m (With armor)
Cable assembly
80-580-0008 (0.3m)
FRU-NMEA-NFF-R15/30
15/30 m (Without armor)
0.8 m
Ground terminal
IV-1.25sq.
Ground terminal
IV-1.25sq.
How to connect wires to WAGO connector
Press downward.
Terminal opener
WAGO connector
Twist
Wire
<Procedure>
1. Twist the cores.
2. Set and press the terminal opener downward.
3. Insert the wire to hole.
4. Remove the terminal opener.
5. Pull the wire to confirm that it is secure.
Summary of Contents for GS-100
