Furuno GS-100, Operator'S Manual

Page: 18 / 157

1. OPERATIONAL OVERVIEW
1-4
1.3 How to Adjust the Brilliance of the Display and
Panel
1. Press the BRILL key to show the following setting window.
2. To adjust the display brilliance, press the cursorpad ( W or X ) or the BRILL key
(setting range: 0 to 15, default: 14 for day mode/6 for night mode).
3. To adjust the panel brilliance, press the cursorpad ( S or T ) (setting range: 0 to
9, default: 7 for day and night modes).
4. Press the MENU ESC key to close the setting window.
Note 1: The default settings for night mode is 6 for [Display] and 7 for [Panel]. If the
display is difficult to see when switching to the night mode, press the cursorpad ( X ) to
increase the display brilliance.
Note 2: When you switch the brilliance mode, the last-used brilliance for the selected
mode is set.
Note 3: When the brilliance is preset, the background color is also preset (see
section 2.2). So both the brilliance and the background color are restored to the de-
fault when long-pressing the
ENT key.
Switch the color mode between
day mode and night mode.
Long-press to restore the
settings to default of day mode.