Furuno GP-3700F, Operator'S Manual

Page: 43 / 224

3-1
3. TRACK
Own ship track is plotted on the plotter display using position data fed from the built-
in GPS receiver. When connecting with a ARPA-equipped radar or a TT-equipped ra-
dar, other ship’s track can also be plotted.
The own ship track or other ship’s track can be saved as a route (see section 6.1.3).
3.1 How to Show/Hide Track
3.1.1 How to show/hide own ship track
Own ship track is shown by default.
1. Press the MENU key to open the main menu.
2. Select [4. MARK/TRACK SETTING].
3. Select [DISPLAY TRACKS] on page 1.
4. Select [SHOW] to show own ship track or [HIDE] to hide own ship track.
5. Press the
DISP key to close the menu.
T
㻜㻝
Current vector
Time mark
Own ship track
Course line
Headling line
Own ship mark
TTM mark
(Target symbol)
Target number
Current vector
Other ship’s track
Drift vector