Furuno GP-3700F, Operator'S Manual

Page: 26 / 224

1. OPERATIONAL OVERVIEW
1-12
1.7 Function Keys
Some menu functions and menus can be assigned to the F1 or F2 key. This allows
one-touch access to the assigned function or menu. The SHIFT , RANGE and GAIN
keys can be available for function keys.
Note: The F1 (or F2 ) key programmed with an echo sounder function is valid only on
the echo sounder display or the echo sounder menu.
1.7.1 How to operate a function key
Press the function key that corresponds to the function you want to use.
1.7.2 How to set up a function key
You can change the function assigned to a function key.
1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [3. FUNC. KEY/RCU SETTING].
4. Select the item to change. For example, select [F1 KEY] when you change the
function assigned to the F1 key.
5. Referring to the table below, select a function.
Function Description
[WAYPOINT LIST] Opens [WAYPOINTS LIST].
[ROUTES LIST] Opens [ROUTES LIST].
[SAVE USB MEMORY] Opens the [USB MEMORY RECORDING] menu.
[READ USB MEMORY] Opens the [USB MEMORY PLAYBACK] menu.
[INTERNAL MEMORY RE-
CORDING] Opens the [INTERNAL MEMORY RECORDING]
menu.
[INTERNAL MEMORY PLAY-
BACK] Opens the [INTERNAL MEMORY PLAYBACK]
menu.
[TRF USB TO INT MEMORY] Opens the [TRF USB TO INT MEMORY] menu.
[DISPLAY INTERNAL MEMO-
RY] Opens the [DISPLAY INTERNAL MEMORY] menu.
[MARK LINE TYPE] Each press switches the line type in the following se-
quence.
Solid line
→
Dotted line
→
Dot-dash line
→
Two dot-
dash line → Solid line …
[DISPLAY AIS TRACK] Each press shows or hides AIS tracks alternately.
[DISPLAY CNSRT TRACK] Each press shows or hides consort tracks alternately.
[DISPLAY TT TRACK] Each press shows or hides TT tracks alternately.
[DISPLAY GPS BUOY TRK] Each press shows or hides GPS buoy tracks alter-
nately.
No use.