12. AIS OPERATIONS
12-5
12.4.2
How to display the AIS list
1. Press the
MENU
key to open the main menu.
2. Select [2. OTHER SHIPS LIST].
3. Select [1. AIS LIST] to show the AIS list.
•
or
: Shifts the page.
•
CENTER
key: Centers the selected AIS target on the plotter display. When
[TARGET SMART TRACK] (see page 9-14) is set to [ON] and [DISPLAY AIS
TRACK] (see section 12.3.1) is set to [SHOW], each press of the key centers
an AIS target or own ship alternately. For an AIS target, the indication shown in
the figure below appears at the top left of the screen.
Note:
The orientation mode for own ship can not be changed during OS MODE.
•
ENTER
knob: Press the
ENTER
knob to display the detailed data for the select-
ed AIS target (see section 12.4.1).
•
TRACK COLOR
key: Shows the [CHANGE TRACK COLOR (ALL AIS)] win-
dow (see section 12.3.2).
•
PLOT INTVL
key: Stops or restarts recording of track for the selected AIS target
4. Press the
DISP
key to close the AIS list and the menu.
When [TARGET SMART TRACK] is set to [ON]
(see page 9-15), this indication changes as below.
Target no.
Summary of Contents for GP-3700F
