Furuno GP-3700F, Operator'S Manual

Page: 120 / 224

9. OTHER FUNCTIONS
9-12
[WAYPOINT STATUS]: Turns the waypoint status icon on or off on the plotter display.
This icon (default: ) shows the current shape and color of waypoints.
[WAYPOINT INFORMATION]: Turns the waypoint data on or off. When [SHOW] is se-
lected, place the cursor on a waypoint to show the waypoint data box.
[DISPLAY MARK INFO.]: Turns the mark data on or off. When [SHOW] is selected,
place the cursor on a mark to show the mark data box.
[DISPLAY FORMAT] menu: Page 4
[OWN SHIP’S MARK]: Selects the size of own ship mark from [LARGE], [SMALL] or
[SHAPE OF SHIP]. [SHAPE OF SHIP] is selected to indicate the length and width of
your vessel, with [SHIP’S LENGTH], [SHIP’S WIDTH], [ANTENNA POSITION V a]
and [ANTENNA POS. SIDE b] below.
[SHIP’S LENGTH]: Sets the ship’s length. (See the installation manual.)
[SHIP’S WIDTH]: Sets the ship’s width. (See the installation manual.)
[ANTENNA POSITION V a], [ANTENNA POS. SIDE b]: Sets the antenna unit position.
(See the installation manual.)
[WAYPOINT OVERWRITE]: Turns the confirmation message on or off when entering
an existing waypoint name.
[COG HOLD (LOW SPD)]: Selects whether to update COG or not when ship’s speed
is under 1 kn or under 0.2 kn.
[YES (1kn)]: COG is not updated when speed is under 1.0 kn.
[YES (0.2kn)]: COG is not updated when speed is under 0.2 kn.
[NO]: COG is updated regardless of ship’s speed.
[WPT NAME DISPLAY]: Shows or hides leading zero(es) in waypoint name, shown
on the plotter display.
7 000007
Waypoint name on the plotter display
[HIDE UNNECESSARY “0”] [DISPLAY ALL “0”]