7-1
7.
DESTINATION
This chapter shows you how to get to a desired destination, using “quick points,” way-
points, and routes.
7.1
How to Go to a Quick Point
The quick point feature allows you to navigate to point(s) without retaining the data in
the internal memory. Each time a quick point is entered, previous quick points having
the same numbers as newly entered ones are written over.
How to select the quick point entry method
You can select the quick point entry method: single point or multiple points (up to 100
points).
1. Press the
MENU
key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [1. DISPLAY FORMAT].
4. Select [SET GOTO METHOD] on page 3.
5. Select [ONE POINT] or [100 POINTS].
[ONE POINT]: Sets a single quick point as a waypoint.
[100 POINTS]: Sets multiple quick points (up to 100) as a route.
6. Press the
DISP
key to close the menu.
