11. AIS OPERATIONS
11-4
11.4
AIS Target Data
You can display the AIS target data.
11.4.1
How to display the individual AIS target data
Basic AIS target data
1. Press the
CURSOR ON/OFF
key to turn on the cursor.
2. Put the cursor on the target you wish to display its data to show the basic AIS tar-
get data.
Detailed AIS target data
1. Press the
CURSOR ON/OFF
key to turn on the cursor.
2. Put the cursor on the target you wish to display its data then push the
ENTER
knob to show the detailed AIS target data.
3. Press the
MENU
or
DISP
key to close the window.
Note 1:
You can display the detailed AIS target data from the AIS list (see
Note 2:
When pushing the
ENTER
knob while the detailed data is displayed, you can
activate or sleep the AIS target (see section 11.2).
“- -” is displayed for
the item without data.
“- -” is displayed for
the item without data.
