9. OTHER FUNCTIONS
9-22
9.5.4
How to display the information for NMEA2000 equipment
1. Press the
MENU
key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [5. INPUT/OUTPUT PORT SETTING].
4. Select [9. SHOW NMEA2000 DEVICES].
5. Select the equipment on the list then do one of the following:
• Pushing of the
ENTER
knob: Displays the detailed information for the selected
equipment.
•
MARK COLOR
key: Sets the selected equipment as the priority heading sen-
sor.
•
PLOT INTVL
key: Sets the selected equipment as the priority autopilot.
The appropriate icon as shown in the table below is displayed in [SET] for the pri-
ority sensor, in [USE] for the currently used sensor.
6. Press the
DISP
key to close the menu.
9.5.5
How to set the NMEA2000 PGN
1. Press the
MENU
key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [5. INPUT/OUTPUT PORT SETTING].
Icon
Meaning
Color
[SET] position: Priority heading sensor
Same color as the texts
[USE] position: Currently used heading sensor Orange
[SET] position: Priority autopilot
Same color as the texts
[USE] position: Currently used autopilot
Orange
[SET] position: Priority heading sensor and au-
topilot (composition)
Same color as the texts
[USE] position: Currently used heading sensor
and autopilot (composition)
Orange
1
2
SC-30
PG-700
98765-43210
12123434
10
3
LEN(ALL):14
