Furuno GP-1871F Operator'S Manual Download Page 27

Page: 27 / 97

2. PLOTTER

2-8

2.14

Tide Information

Tide stations offer tide information in the form of a graph.

Note:

A chart card with valid tide station data is required to view tide station informa-

tion.

2.14.1

How to show the tide graph

You can show a tide graph with one of the following methods. Information shown in
the graph changes depending on the selected method.

• Tap a tide station.
• Tap [Tide] in the slide-out menu, or from the [Home] screen.

Weather data
update status

Fill check box
to show tide
stations

Playback ( ) or pause ( ) the weather forecast.

Time scale
(24 hr format)
Drag the slider
(yellow circle) to
adjust the time
shown on-screen.

Show

day

Weather conditions for currently
selected time, at the cursor location.

: Sky conditions

: Waves

: Currents

: Air temperature

: Humidity

: Winds

: Visibility

Currently displayed date and time. Tap the
calendar icon to change the forecast date.

Show

next day

Page symbols (current selection highlighted in orange color)

Tide
station
icon

Summary of Contents for GP-1871F


































































































Search results

Summary of Contents for GP-1871F

Reviews:

Related manuals for GP-1871F

Brands by name

Popular brands

Furuno GP-1871F, Operator'S Manual

Search results

Summary of Contents for GP-1871F

Reviews:

Related manuals for GP-1871F

Brands by name

Popular brands