Furuno GP-1871F, Installation Manual

Page: 21 / 33

5. MAINTENANCE AND TROUBLESHOOTING
34
5.4 How to Restore the Default Settings
There are two methods to restore default settings. You can clear the menu settings,
saving only user data such as routes and points, etc, or reset the entire GP-1x71F set-
tings to factory default. To restore the default settings for both methods, follow the pro-
cedure below.
1. Tap the [Home] icon to show the [Home] screen, then tap [Settings] => [Initial Set-
up].
2. To reset the menu settings and keep user data , tap [Factory Defaults]. De-
pending on the level of restoration, tap the appropriate item.
• [Restore to Factory Defaults]: Resets the [Initial Settings] menu only.
• [Restore All to Factory Defaults]: Resets all menu settings only.
A confirmation message appears, tap [Yes] to reset the selected settings, or [No]
to cancel.
3. To reset the entire GP-1x71F settings and clear all user data, tap [Clear Memory]
=> [Clear].
A confirmation message appears, tap [Yes] to reset the selected settings, or [No]
to cancel. The system clears all selected, then restarts.
5.5 How to View the System Information
The system information is for use by service technicians and shows information such
as software version numbers, serial numbers and copyright information.
To view the system information, tap the [Home] icon, then tap [Initial Setup] =>
[About].
AP-1
APPENDIX 1 MENU TREE
Show COG Line ( ON , OFF)
Record Tracks ( ON , OFF)
Auto Track Delete ( ON , OFF)
Delete All Tracks
Track Interval (1 sec, 5 sec, 10 sec, 30 sec, 1 min,
5 min, 10 min, 30 min, 1 h)
1
Settings menu
General
Function
Gestures
Key Beep
Date and
Time
Color Schemes
Wireless LAN
Quick Guide
Ship
Track
COG Vector
Track
Recording
Track Color Type ( Single Color , Multi-color)
Multi-color Reference (Depth, Temperature, Speed, Bottom Discrimination)
Thickness (1 px,
2 px , 3 px)
Delete Options
Color - Single Track ( Red , Green, Blue, Yellow, Cyan, Magenta, Brown,
Gray, Black)
Headline
Own Ship
Offset
Presentation Mode (
Head Up , Course Up, North Up)
Offset (ON, OFF )
Own Ship Icon ( , , , )
NAVpilot
Course
Restore
Defaults
Wireless
Antenna
Show Quick Guide on Startup ( ON , OFF)
Show Headline ( ON , OFF)
Show NAVpilot Course (ON, OFF )
Time ( Inifinite , 2 minutes, 10 minutes,
30 minutes, 1 hour, 2 hours)
Thickness (1 px, 2 px , 3 ppx)
Restore Default Settings (Select Yes/No from pop up window)
Active Network
Networks
Wireless Antenna (ON, OFF )
Disconnect
(Tap to select a network.)
Two Fingers Tap (None, Center, Screenshot , Expand Screen,
Event, MOB, Points List, Routes List)
Two Fingers Double Tap (Same as Two Fingers Tap,
default: Event )
Beep ( ON , OFF)
Instruments Theme ( White , Black)
Local Time
Offset
Daylight Saving
Time Format (12h,
24h )
Date Format ( DD/MM/YY , MM/DD/YY, YY/MM/DD)
UTC ( ON , OFF)
Daylight Saving Time (ON, OFF )
Custom (-12:00 to +13:00, default: +0:00 )
Bold italic : Default setting
Ship &
Tracks
Simulation Simulation (ON, OFF )
Course ( 0° to 360°)
Speed ( kn ) ( 1 to 194.2)
Date ( Current date , 01/01/01 to 31/12/99)
Time ( Current time , 00:00 to 23:59)
Fish Finder ( Off , CHIRP Demo, RezBoost Demo)
Simulation
Parameters
Mode (Internal Slideshow, Slideshow from SD, Simulation )
Restore
Defaults Restore Default Settings (Select Yes/No from pop up window)