Furuno GP-1870F, Operator'S Manual, Page: 65 / 209

4. ROUTES
4-11
4.9 How to Display a Route on the Screen
Open the [PLOTTER] menu and select [ROUTES] to show the [Routes List]. Select a
route then press the
ENT key. Select [PLOT] from the context-sensitive menu then
press the ENT key.
4.10 How to Connect Two Routes
You can connect two routes from the [Routes List]. In the example below route 1 is
connected to route 2.
1. Open the [PLOTTER] menu and select [ROUTES] to show the [Routes List].
2. Select the starting route then press the
ENT key.
3. Select [EDIT] from the context-sensitive menu then press the ENT key.
4. Use the RotoKey
TM
to select the [Connect] button (at the bottom of the screen)
then press the RotoKey
TM
to display the routes list (at right half of the screen).
5. Select route 2 then press the ENT key.
The joined route is saved under the name of route 1. If the total number of points ex-
ceeds 50, the excess is removed from the end of the route.
4.11 Simple Route Information
You can find simple route information for a route by putting the cursor on a leg of the
route. The name of the route and the date of its creation are shown.
RT0001
12:20PM 03-16-12
Name
Comment