1. OPERATIONAL OVERVIEW
1-2
Key sound
When you operate a key, a single beep sounds. If you do not need the key beep, de-
activate the beep sound as follows (see section 1.5):
1. Press the
MENU/ESC
key to open the main menu.
2. Select [4 Notice Setting] then [9 Sound].
3. Select [2 Key Sound].
4. Select [2 Off].
5. Press the
MENU/ESC
key to close the main menu.
6
DISPLAY/1
• Selects and confirms the
selected menu item.
• Enters a numeric character.
Selects the display mode.
7
ROUTE/2
Starts/stops the registration of a route
on the plotter display.
8
GO TO/3
• Sets a destination at the cursor
position on the plotter display with
cursor on.
• Opens the context menu for Go To
on the plotter display with cursor
off.
9
MOB/4
Marks a man overboard position and
sets a destination on the plotter
display.
10
MARK EVENT/5
• Puts a mark at the cursor position
on the plotter display with cursor
on.
• Puts an event mark at own ship’s
position on the plotter display with
cursor off.
11
PLOT ON/OFF/
6
Resumes/stops track plotting on the
plotter display.
12
ZOOM IN/7
Zooms in the plotter display.
13
CENTER/8
• Centers the cursor position on the
plotter display with cursor on.
• Centers own ship’s position on the
plotter display with cursor off.
14
ZOOM OUT/9
Zooms out the plotter display.
15
CURSOR ON/OFF/
0
Turns the cursor on or off on the
plotter display.
16
ACK/DELETE
• Acknowledges an
unacknowledged alert when
the pop-up appears.
• Deletes all setting values on
the setting window when
there is no unacknowledged
alerts.
• Acknowledges an unacknowledged
alert when the pop-up appears.
• Deletes registered data (marks,
etc.) at the cursor-selected position
on the plotter display when there
are no unacknowledged alerts.
17
BRILL
Opens the brilliance adjustment window.
Adjusts the display brilliance when the adjustment window opens.
18
(Power)
Turns the power on or off.
19
USB port
For connection of USB flash memory.
No.
Control
Function
Menu screen
Display mode
