GPS NAVIGATOR GP-150/DUAL
Operator’s Guide
The purpose of this Guide is to provide basic operating procedures for this equipment. For more
detailed information, see the Operator's Manual.
Selecting a Display Mode
Press
DISPLAY SEL
to select desired mode.
Plotter 1/Plotter 2
234
°
D3D 100m
SAFE
34
°
23.456´ N 135
°
45.678´ E
BRG
345
°
BRG To +
11.5
RNG To +
nm
123
°
COG
001
30
40
20
50
H
16.00
This column does not
appear on Plotter 2 display.
Ship's track and
data
WGS84
Highway
34
°
D3D 100m
SAFE
34
°
23.456´ N 135
°
45.678´ E
BRG
45
°
RNG
12.3
SOG
kt
0.35
nm
COG
WGS84
3D view of ship's
track overlaid on
intended course
Navigation
E
3D
N
S
SOG
RNG
TRIP
nm
kt
VTD
kt
nm
BRG
23:45'
17H 45M
TO;
012
0.1nm
0.1nm
15
63
°
123
°
CSE
ETA
TTG
D3D
100m
SAFE
Graphic display
of steering data
WGS84
12.3
10.3
123
789
Data
JUN 12, 2006 23:59'59" U
12
°
23.456' N
123
°
23.456' E
POSITION
RNG
31.23
nm
SOG
12.3
kt
BRG
223.4
°
COG
123.4
°
TO : 001
MARINE
POINT1
NEXT
: 002
MARINE
POINT2
D3D
100m
SAFE
Comprehensive
navigation data
display
Enlarging/Shrinking the
Display
Press
ZOOM IN
to enlarge.
Press
ZOOM OUT
to shrink.
Shifting the Cursor
1) Press
CURSOR ON/OFF
to turn on the
cursor.
2) Operate the cursor pad to shift the cursor.
Shifting the Display
1) Press
CURSOR ON/OFF
to turn off the
cursor.
2) Operate the cursor pad to shift the display.
Press the
CENTER
key to shift own ship to
the center of the display.
Centering Cursor Position
1) Press
CURSOR ON/OFF
to turn on the
cursor.
2) Operate the cursor pad to position the cur-
sor where desired.
3) Press
CENTER
.
Entering/Erasing Marks
1) Press
CURSOR ON/OFF
to turn on the
cursor.
2) Operate the cursor pad to position the cur-
sor where you wish to enter a mark.
3) Press
MARK
.
To erase any mark (except MOB),
place
the cursor on the mark and press
CLEAR
.
