GF-8801, GF-8802, GF-8803
Hardware Specifications
SE19-410-006-00
21
11 RoHS
This product is RoHS compliant.
12 Flame Retardancy Rank
UL94V-1 compliance.
13 FIT
GF-8801 ---2000FIT
GF-8802 ---2500FIT
GF-8803 ---3100FIT
Calculation requirements
- Telcordia 332 issue3
- Parts count method
- Environmental factor: GF
- Operating temperature: 50°C
- Quality level: Level 0
- Using the failure rate from manufacturer: Yes
14 Reliability Test
#
Test Item
Conditions
1
High temperature high humidity bias life
1000 hours, T
A
=85°C, RH=85%
2
High temperature high humidity storage
life
1000 hours, T
A
=85°C, RH=85%
3
Low temperature operating life
500 hours, T
A
=-40°C
4
Low temperature storage life
500 hours, T
A
=-40°C
5
Drop test
With packing, 50 cm natural drop
6
Vibration test
Each three direction (x,y,z), 10 to 55 Hz, 4.7G (46m/s
2
),
30 minutes (Not operating)
7
ESD test
JIS C 61000-4-2 Contact
15 Soldering Condition
Recommended flow soldering conditions are as follows. However, please adjust the conditions depending on
the board and the equipment.
-
Pre-heat: 120 to 150 °C for 2 minutes
-
Peak temperature: 250 °C for 10 seconds max
Recommended hand soldering condition is as follows.
-
350 °C for 3 seconds or less