Furuno FSV-35S, Operator'S Manual

Page: 116 / 144

7. RECORD/RECALL OPERATION
7-6
7.5.2 How to replay setting information
You may want to replay setting information to set up the equipment according to target
fish or fishing ground.
1. Push the right-click button on the numeric/graphic data display to show the pop-
up menu.
2. Select [Record/Recall] then push the left-click button.
3. Select [Setting File] then push the left-click button.
4. Select [Load User Prog] then push the left-click button.
5. Select a file to load from the destination list.
6. Select the setting number from the [User Program to load] list then push the left-
click button.
7. Select the setting number to load from the [User Program to set] list then push the
left-click button.
8. Select [Load] then push the left-click button.
The progress bar at the bottom of the box shows the loading progress. The [Set-
ting File] menu appears when the saving is completed.
9. Long-press the MENU/ESC key to close all menus.
Destination list
Progress bar
User Program to set list User Program to load list