Furuno FR-1908V-BB, Installation Manual

Page: 24 / 44

3. ADJUSTMENTS
3-2
3.2 How to Set Alarms
For alarm details, see section 1.28.2 “Alarm description” in the Operator’s Manual for
details.
Alarm sound level
1. Press the MENU key to show the main menu.
2. Use the touch pad to select [13 INITIALIZE], then press the left button (click) to
show the [INITIALIAZE] menu.
3. Click [ALARM]
o
[ALARM SOUND LEVEL] menu.
4. Click the appropriate sound level of an alarm among [OFF], [LOW], [MID] or
[HIGH] (default: [MID]).
How to activate/deactivate alarms
The following alarms can be set on/off.
• [SYSTEM ERROR]: This alarm activates when the system has an error.
• [SENSOR ERROR]: This alarm activates when the sensor signal has an error.
• [AIS ALARM]: This alarm activates when the AIS signal has an error.
• [OTHER WARNING]: For other than the above three alarms.
1. Press the
MENU key to show the main menu.
2. Use the touch pad to select [13 INITIALIZE], then press the left button (click) to
show the [INITIALIZE] menu.
3. Click [ALARM], then click the alarm whose settings you want to change.
4. Click [ON] to activate the alarm. When [OFF] is selected, the alarm indication does
not appear and the alarm sound is not generated.
3.3 How to Enter Your Ship’s Characteristics
Ship’s length and width
1. Press the MENU key to show the main menu.
2. Use the touch pad to select [13 INITIALIZE], then press the left button (click) to
show the [INITIALIAZE] menu.
3. Click [OWN SHIP INFO] to show the [OWN SHIP INFO] menu.
4. Click [LENGTH].
5. Rotate the setting knob to set the ship’s length.
6. Click [WIDTH].
7. Rotate the setting knob to set the ship’s width.
Conning position
1. Open the [MAIN]>[INITIALIZE]>[OWN SHIP INFO] menu.
2. Click [CONNING - BOW], then input the distance from the bow to the conning po-
sition.