Furuno FR-10, Operator'S Manual

Page: 91 / 171

2. OPERATION
2-55
2. Press  or  to select [Others], then press the ENTER key.
3. Press  or  to select [WPT Mark], then press the ENTER key.
4. Press  or  to select [Off] or [On] then press the ENTER key.
5. Press the MENU key to close the menu.
2.42 How to Send the Target Position and Enter the
Origin Mark
The TLL function sends the cursor position to a chart plotter and put an origin mark
( ) at the cursor position on the radar. Use the cursorpad to put the cursor on a tar-
get. Press the MODE key to open the [Mode] window, select [TLL] then press the EN-
TER key. You can enter up to 20 origin marks on the radar display. When the capacity
for origin marks is reached, the oldest mark is erased to make room for the latest mark,
to keep a maximum of 20 marks. To erase a mark, put the cursor on the mark, then
press the MENU key.
TLL mode
You can select how to handle TLL position.
1. Press the MENU key to open the menu.
2. Press

or

to select [Others], then press the ENTER key.
3. Press

or

to select [TLL Mode], then press the ENTER key.
4. Press

or

to select [TLL Output], [Origin Mark] or [Both] then press the EN-
TER key.
[TLL Output]: Send the latitude and longitude of the cursor position to a chart plot-
ter. (Position and heading signal are required.)
[Origin Mark]: Enter an origin mark at the cursor position on the radar display. (Po-
sition and heading signal are required.)
[Both]:Send the target position to a chart plotter and enter an origin mark on the
radar display.
5. Press the MENU key to close the menu.
Note: All origin marks are deleted and not saved when the power is turned off.
2.43 Sub Display
Set [Radar Type] to [Sub] in the [Installation] (sub-menu of the [System] menu), the
radar display will be changed to sub display.
In the sub display, the structure of the menu and the display of the screen will change.
To display the radar image in the sub display, set the main display to the transmitting
status.
Note: The [Radar Type] cannot be changed during transmission.