Furuno FMD3100, Operator'S Manual

Page: 34 / 395

1. INTRODUCTION
1-18
1.18.2 Function availability in split screen operation
1.18.3 Split screen usage characteristics
• If the sub view is not displayed correctly, restore the full screen display then try to
activate the split screen again.
• The display may not be updated when switching to the Voyage planning mode. If
this occurs, switch to the Voyage navigation mode, restore the split screen display
then return to the Voyage planning mode.
• The own ship mark may not appear when releasing the split screen display. If this
occurs, click the indication "TM/CU Reset" at the top right position on the screen to
show the own ship mark (at the screen center).
• The TM reset feature only works on the active display. To return the own ship mark
to the screen center, click the indication [TM/CU Reset] at the top right position on
the screen.
• The sub view can use a location and chart scale different from the main view.
• The chart scale related messages (overscale, larger ENC available, etc.), which ap-
pear beneath the chart scale indication, show only on the main view.
Item
Viewable Operable
Main view Sub view Main view Sub view
AIS target Yes Yes Yes Yes
Anchor watch Yes Yes Yes No
Chart display Yes Yes Yes No
Danger highlight Yes Yes Yes No
Divider Yes Yes Yes No
EBL, VRM Yes Yes Yes Yes
Parallel index lines Yes Yes Yes Yes
Radar overlay Yes No Yes -
Range rings Yes Yes Yes No
TT Yes Yes Yes Yes
Weather display Yes No Yes -