Furuno FMD3100, Operator'S Manual

Page: 290 / 395

19. RECORDING FUNCTIONS, PLAYBACK FUNCTIONS
19-10
19.5.1 How to filter the dangerous targets log
You can filter the dangerous targets log by CPA or TCPA. When a TT or AIS target’s
CPA or TCPA is lower than the setting here, the target’s details are automatically
logged.
To set the filter, do the following:
1. Open the menu and select [Log], [Target Log] and [Danger Target] to show the
[Danger Targets] menu.
2. At [CPA/TCPA], select [ON].
3. At [CPA], set the distance for the CPA.
4. At [TCPA], set the time for the TCPA.
Note: [Log Interval] is fixed at 10 minutes.
5. Click [Save] to save the settings, then click [Close] to close the menu.
19.6 Route Transfer Log
The [Route Transfer] log keeps a tab of sent and received route-related communica-
tions. When one or more of the following conditions are met, an entry is made in the
[Route Transfer] log.
The log data includes the following:
• RRT sentence is sent from this system.
• RRT sentence is received by this system.
•
A sent RRT sentence is not acknowledged by an external device.
• Date: Date of entry
• Time: Time of entry
• Communication Type: Send, Receive or No Response
• Source: UID of route related communication
• Destination: UID of destination of route related communication
• Detail: Content of transfer
• Transfer Type: Type of communication - Monitor route, Plan route, or Query
• Transfer Name: Name of transferred route
• Transfer Version: Transferred route’s version
• Current WPT: Current waypoint
• Transfer Status: Current transfer status of the transferred route
• Application Status: Current status of the transfer application