Furuno FMD3100, Operator'S Manual

Page: 122 / 395

5. VECTOR (S57) CHARTS
5-6
5.2.4 How to highlight updated data
You can highlight updated data by setting a date (or date period) and creating a report.
1. On the InstantAccess bar
™
, click the [Chart INFO] and [Viewing Dates] button.
The [Viewing Date] dialog box appears.
2. In the [Update Review] column, check the [Date Range] box. The [Start Date] and
[End Date] buttons become active and selectable.
3. Click the [Start Date] button to show the [Set date] dialog box.
4. Select the start date, then click [OK].
5. Click the [End Date] button to show the [Set date] dialog box.
6. Select the end date, then click [OK].
7. Click [Object Report]. The [Object Update Review] dialog appears.
8. Select the items to highlight, then click the [View] button.
Items selected here appear with an orange highlight mark.
9. To remove highlights, set the [Update Review] column of the [Viewing Dates] di-
alog box to [OFF].
10. Click the [Close] button on the [Viewing Dates] dialog box to close the dialog box-
es.
Date buttons active
and selectable
Object Report
button