Furuno FM-4800 Operator'S Manual Download Page 67

Page: 67 / 135

GENERAL SETUP

FM-4800 Operator’s Manual

Step 4

Press the

Menu/DSC

control to save the setting and return to the previous

page.

10.2.3

Speed

This feature allows you to set the unit of measurement for sailing speed.

Note

A GNSS receiver should be connected to the radio or the "INTERNAL GNSS"
should be set to "ON" to show the sailing speed.

Step 1

Press the

Menu/DSC

control until the "MAIN MENU" screen appears.

Step 2

Go to "GENERAL SETUP > UNITS > SPEED".

Step 3

Select a unit.

Step 4

Press the

Menu/DSC

control to save the setting and return to the previous

page.

10.2.4

Bearing

This feature allows you to set the mode (magnetic or true).

Note

A GNSS receiver should be connected to the radio or the "INTERNAL GNSS"
should be set to "ON" to show the bearing.

Step 1

Press the

Menu/DSC

control until the "MAIN MENU" screen appears.

Step 2

Go to "GENERAL SETUP > UNITS > BEARING".

Step 3

Select "TRUE" or "MAGNETIC".

Step 4

Press the

Menu/DSC

control to save the setting and return to the previous

page.

10.3 Key Beep

This feature allows you to set the volume level of the beep that is emitted when a key
is pressed.

Summary of Contents for FM-4800








































































































































Search results

Summary of Contents for FM-4800

Reviews:

Brands by name

Popular brands

Furuno FM-4800, Operator'S Manual

Search results

Summary of Contents for FM-4800

Reviews:

Brands by name

Popular brands