Furuno FE-800, Operator'S Manual

Page: 27 / 60

1. OPERATION
18
1.18 How to Change the Unit of Measurement
You can change the displayed unit of measurement for depth and speed using the following
procedure.
1. Press the MENU/ESC key to open the Main menu.
2. Select [Display] using  or  , then press the ENT key.
3. Select [Unit] using  or  , then press the ENT key. This will open the
[Unit] pop-up window.
4. Select the [Depth] or [Speed] using  or  , then press ENT to open the
settings pop-up window. The available options are shown in the table below.
5. Press the MENU/ESC key three times to close the menu.
1.19 How to Select the Displayed Course
You can select a course reference, true or magnetic.
1. Press the MENU/ESC key to open the Main menu.
2. Select [Display] using  or  , then press the ENT key.
3. Select [Course] using  or  , then press the ENT key. This will open
a pop-up window.
4. Select the course display using  or  , then press ENT to apply the
setting. The available options are [True] and [Magnetic].
5. Press the MENU/ESC key twice to close the menu.
Number Description
1 Currently displayed time setting.
[UTC]: Coordinated Universal Time.
[Local]: Time with UTC difference calculated.
[Time]: Unit’s internal clock time.
2 When the external time source is unavailable, a “*” appears to the left of the time.
If
[Time Adjust ] is set to Internal, the color changes according to the setting se-
lected at section 1.20.
3 Currently viewed page. Data is listed in order from newest to oldest.
Item Unit
Depth m (meters)
ft (feet)
Speed kn (knots)
MPH (Miles Per Hour)
km/h (Kilometers Per Hour)