Furuno FE-800, Operator'S Manual

Page: 16 / 60

1. OPERATION
7
1.4.2 HISTORY Mode
This mode provides a mix of Contour and Strata echo readings taken. The amount of data stored
in the HISTORY log depends on the interval setting. The table below shows the differences in
amount of data that can be stored.
Previous echo readings can be accessed by using  or  to move the cursor.
Interval setting Amount of data stored
2 min 24 hours
1 min 12 hours
5 sec 1 hour
Number Description
1 FORE/AFT depth history.
2 Time (location) in sounding depth history. Move this indicator using  or  .
FORE/AFT history readings are displayed at the bottom of this screen.
3 Change indicator. This line appears in the case of any de-synchronization
between the FE-800 and connected sensors or units.
1
3
2