3. SCREENSHOTS & DATA RECORDING
3-3
3
3.1.4
How to replay a screenshot
To replay a saved screenshot, press and hold the scrollwheel on the Trackball Control
Unit. The replay screen is displayed and the oldest screenshot is shown. A total of
1000 screenshots can be load to replay.
To change the displayed file, press the arrow buttons (
) or
).
To close the replay screen, press the icon a the top-right of the screen.
Note 1:
Where there are no screenshots to play back and the scrollwheel on the track-
ball is pressed and held, a blank screen (black color) appears.
Note 2:
The indication for the number of current screenshots and total screenshots is
located at the bottom of the screen (see figure above). This indication shows the num-
ber of screenshots at the time of opening the replay screen and does not reflect any
new screenshots taken while the replay screen is open. To refresh the count, close,
then re-open the replay screen.
How to filter the screenshots that are displayed
Click the filter icon (
) at the top-left of the screen to
show the filtering options pop-up window. Select the ap-
propriate check box to show the filtering options. You
can select either of, or both of the filters.
• [Date Time]: Apply a filter based on date. You can se-
lect a single filter (for example, filter by month only) or
a mixed filter (for example, filter by year, month and
date).
• [Position]: Apply a filter based on a specific location
and/or a nautical mile radius from the specified point.
Filename (Date and time the file was saved)
Playlist location (current screenshot/total screenshots)
Filter button
