manualshive.com logo in svg

Furuno FCV-38, Manual

Share
Download
Furuno FCV-38 Manual Download Page 107

4.  ADVANCED SETTINGS

4-25

4

4.8.2

Display menu

You can adjust the display settings for the external fish finder from the [Display] menu 
of the [External Fish Finder] menu.

4.8.3

Measurement menu

The [Measurement] menu appears when an ACCU-FISH

™

 compatible transducer is 

connected. See section 1.21.2.

Menu item

Description

[Mode]

Selects the display mode for the external fish finder.
•  [HF/HF]: High and Low frequency.
•  [HF]: High frequency only.
•  [LF]: Low frequency only.

[Display Division]

Selects the method in which the display is divided. This option is only avail-
able when [Mode] is set to [HF/LF].
•  [Horizontal]: The dividing line runs horizontally (left to right) and the dis-

play shows high frequency input at the top of the screen.

•  [Vertical]: The dividing line runs vertically (top to bottom) and the display 

shows high frequency input to the left of the screen.

[Colors]

Selects the number of colors (16 or 64) available for the [Color Bar] and 
echo colors.

[Hue]

Selects a hue to suit the ambient light.
•  [Normal]: Use the default hue settings.
•  [Hue1] to [Hue6]: Use the custom hue settings for the respective selec-

tion.

[Background]

Selects the background color for the display. Some indications will auto-
matically change color according to the color selected here. Valid when 
Hue is selected to other than [Hue5].

[Depth Size]

Selects the size of the depth text indication.

[Depth Scale]

Selects where to locate the depth scale.
•  [Off]: Hide the depth scale.
•  [Right]: Show the scale at the far right-hand side of the screen.
•  [Center]: Show the scale at the center of the screen.

ACCU-FISH

Off

Measurement

Sounder

HF

LF

Display

Measurement

Range

System

Summary of Contents for FCV-38

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands