Furuno FCV-2100, Installation Manual

Page: 35 / 59

3. INITIAL SETTINGS
3-7
Communication port monitor
The serial signal monitor is available for each port.
Select the port tab from the communication port monitor window, then press the [Up-
date] button to display the receiving data for selected port.
3.4 External Echo Sounder Setting
To set the external echo sounder, two methods are available: from main monitor or
sub monitor. If you have a sub monitor and [External Fish Finder Window] is set to
[On], the parameters are set from the sub monitor’s menu.
3.4.1 [External Fish Finder Window] setting: Off
The compatible external echo sounders (fish finder) are either a DFF3 or a DFF1-
UHD. Set the transducer parameters from the main monitor as belows:
1. Select the [Advanced Settings] icon ( ) from the InstantAccess bar
™
, and se-
lect the [Advanced Settings] icon ( ) from the menu bar.
The [Advanced Settings] menu windows appears.
2. Select [Service] to expand the service menu.
The message “Ask your dealer to change service settings.” appears.
3. Press and hold the [OK] button to open the service advanced menu.
4. Select the “External Echo Sounder” from the [Service] menu.
• Serial Port 1 (NMEA): NMEA1 port on processor unit. (default setting: NMEA)
• Serial Port 2 (NMEA): NMEA2 port on processor unit. (default setting: NMEA)
• Serial Port 3 (CIF): NMEA3 port on processor unit. (default setting: CIF)
• Network: Network (LAN) port on processor unit,
Signal monitor area
[Update] button Port tab