Furuno FCV-2100, Installation Manual

Page: 33 / 59

3. INITIAL SETTINGS
3-5
3.3 Communication Port Setting
You can set the communication port (NMEA1/2/3) from the [Tests] menu. To select
the signals for communication, do the following.
1. Select the [Advanced Settings] icon ( ) from the InstantAccess bar
™
and se-
lect the [Advanced Setting] icon ( ) from the expanded menu bar.
2. Select [Tests] from the [System] menu.
The [Tests] menu appears on the right-hand side of the window.
3. Select the [Communication Port Monitor] from the [Tests] menu.
The communication port monitor window appears.
4. Select a port tab to show the corresponding port.
xx.xx
Tabs
[Settings] button
[Close Window]
button