2. WIRING
2-6
9. Attach the waterproofing sheet to the rear of the cable fixing plate.
10. Fasten the two binding screws to secure the fixing plate to the boot cover.
11. Secure the cable to the cable clamp with two cable ties.
Note:
Cable ties are necessary for waterproofing. Failure to secure cables as out-
lined in this procedure can cause water ingress.
2.2
Transceiver Unit
Use the specified cable to connect the transceiver unit to external equipment.
Waterproofing sheet
Cable fixing
plate
Binding screw
(2 pcs.)
Cable ties for fixing
Cable ties for
waterproofing
Cable ties for
waterproofing
MJ-A3SPF0013A-035C
(supplied)
WEA-1004, 1.2m
(supplied)
NETWORK
FCV-2101
MOD-Z072-050+
(supplied) or
FR-FTPC-CY
(option)
EXT-KP
Fish finder
MPYCSLA-4
(local supply)
TRANSDUCER
FCV-2103
Transducer cable
(30m, supplied)
Power source
(Rectirier)
24VDC
GND
Ground to
ship’ s ground
Summary of Contents for FCV-2100
