Furuno FCV-1900/B/G, Installation Manual

Page: 26 / 52

3. INITIAL SETTINGS
19
3.2 Monitor Setting
Depending on your monitor, the resolution setting may need to be changed. The res-
olutions available are XGA (1024x768), SXGA (1280x1024) and SXGA (1024x1280,
portrait type). SXGA monitors (1280x1024) are set to the correct resolution and do not
require this initial setting.
Service menu
1. Press the MENU/ESC key to open the [Setting] menu.
2. Press the MENU/ESC key (approximately ten seconds) to show the [Service]
menu item in the menu.
3. Rotate the ENTER knob to select [Service], then push the knob.
4. Rotate the ENTER knob to select [Display Resolution], then push the knob.
5. Rotate the ENTER knob to select the resolution of your monitor, then push the
knob.
6. The processor unit is restarted automatically. The restart takes approx. 5 minutes.
Setting
Sounder
Display
Measurement
Alarm
Data
System
Service
Bottom Search
Deference Gain
Deference Bottom Level
Log
Display Resolution
TX Triggering
In Trigger
Trigger Input
Out Trigger
Trigger Output
External Fish Finder Trigger
Restore Default Setting
Demonstrate
XDCR Setting
White Marker
ACCU-FISH Calib
Auto
SXGA （ 1280x1024 ）
Off
↑
Off
Positive
Off
Off
Setting
XGA (1024 x 768)
SXGA (1280 ｘ 1024)
SXGA (1024 x 1280)
Bottom Search
Deference Gain
Deference Bottom Level
Log
Display Resolution
TX Triggering
In Trigger
Trigger Input
Out Trigger
Trigger Output
External Fish Finder Trigger
Restore Default Setting
Demonstrate
XDCR Setting
White Marker
ACCU-FISH Calib
Auto
SXGA
（
1280x1024
）
Off
↑
Off
Positive
Off
Off
Sounder
Display
Measurement
Alarm
Data
System
Service