Furuno FCR-2829W, Installation Manual

Page: 114 / 174

5. INPUT/OUTPUT DATA
5-2
Output
**: The output sentence, mode and baud rate can be set at the TT Preset menu.
5.3 IEC 61162 Sentences
Input sentence and priority
Output sentences
Data Specification Contents Remarks
Radar system data IEC 61162-1 Ed.4 RSD, OSD
TT data** IEC 61162-1 Ed.4 TTD, TTM, TLB
Alarm signal IEC 61162-1 Ed.4 4 systems, Output content
are selected by menu.
Contact closure
Data Format priority
Position GNS>GGA>RMC>GLL
Speed (STW) VBW>VHW
Speed (SOG) VBW
Speed (position) VTG>RMC
Heading (True) THS>HDT
NAVTEX received message NRX
Time and Date ZDA
Datum DTM
Acknowledge alarm ACK
UAIS VHF Data-link Message VDM
UAIS VHF data-link Own-vessel report VDO
AIS addressed and binary broadcast acknowledgement ABK
AIS voyage static data VSD
Wind Speed and Angle (True) MWV (T)
Wind Speed and Angle (Relative) MWV (R)
Depth DPT>DBT
Water Temperature MTW
Route Transfer Report RRT
Set and Drift CUR>VDR
Set alarm state ALR
Data Format
Own ship data OSD
Radar system data RSD
Set alarm state ALR
TT target data TTD, TLB, TTM
Addressed Binary and safety related Message ABM
AIS Broadcast binary message BBM
Voyage Static Data VSD
Route Transfer Report RRT
General event message EVE
Acknowledge alarm ACK