Furuno FCR-2829W, Installation Manual

Page: 109 / 174

4. INSTALLING OPTIONAL EQUIPMENT
4-9
4.1.4 Setting the heading readout on the radar display
Confirm that the gyrocompass is giving a reliable readout. Then, set the heading read-
out on the radar display with the gyrocompass readout.
1. Open the main menu.
2. Press the
7 key to select the [OWN SHIP INFO] menu.
3. Press the 3 key to select the [LOCAL SENSOR SETTING].
4. Check [Analog Gyro].
5. Roll the wheel to set gyrocompass reading.
6. Click the [OK] button on the display to close the menu.
4.2 Junction Box
If the length of the antenna cable is more than 100 m, the optional junction boxes are
required. These boxes should be mounted at the location protected because its wa-
terproofing is IPX3.
RW-9600
(Max 15 m)
Junction box
RJB-001
RW-9600
(Max 15 m)
DPYCY-6 (2 or 3 pcs.)
TTYCY-4 (1 pc.)
RG-12/UY (1 pc.) (Max 270 m)
Transceiver unit
Processor unit
Junction box
RJB-001
Shipyard supply