Furuno FCR-2119-BB, Operation Manual

Page: 347 / 541

14-1
14. HOW TO MONITOR ROUTES
Route monitor is a means for permanent monitoring of the ship's behavior relative to
the monitored route. The [Monitor Information] box displays the data on the ship's po-
sition relative to the monitored route. The monitored route consists of the following in-
formation, displayed in the electronic chart area:
• The route is displayed with red dots.
• The limits of channels of each leg are displayed with solid red lines. These limits are
used to detect chart alerts when you are monitoring the route. See chapter 11 for
how to set those limits.
• Each leg has information about planned speed, shown in the [Monitor Information]
dialog box.
• Each leg has information about planned course to steer.
Note: In order to display charts with correctly updated situation, always use current
date as Update Review and Display date during your voyage. If your voyage lasts
more than one week, set current date at least once per week during your voyage. See
section 9.2 for how to set those dates.
14.1 How to Start Route Monitoring
Method 1: InstantAccess bar™
In the Voyage navigation mode, click the [Voyage], [Route] and [Select] buttons on the
InstantAccess bar™. Click a route then click the [Open] button.
177.50NM