manualshive.com logo in svg

Furuno FCR-2119-BB, Operation Manual

Share
Download
Furuno FCR-2119-BB Operation Manual Download Page 251

7.  HOW TO MANAGE CHARTS

7-17

7.14

Catalog of Chart Cells

A catalog is used to view graphical coverage of the charts stored in your SSD. Avail-
able charts are displayed using their limits of charts. Note that sometimes the real cov-
erage of the charts may be considerably less than the declared limits of it.

To display the catalog, get into the Chart maintenance mode then click the [Manage 
Charts] button on the InstantAccess bar™. The [Filter] window lets you select what to 
display. Check or uncheck items as appropriate.

1) [Chart Type]

[ENC]: Display ENC charts.
[ARCS]: Display ARCS charts (no use).
[C-MAP]: Display C-MAP charts.

2) [Availability]

Display available or unavailable charts.

3) [License]

[Valid]: Cell with valid license.
[Missing/Expired]: Cell with missing or expired license.
[Valid] + [Missing/Expired]: Display cell regardless of license.
Uncheck both: Hide all cells.

4) [Dynamic License]

Display DL or non-DL C-MAP charts.

Filter 
window

13

14

Summary of Contents for FCR-2119-BB






























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands