Furuno FAR-1416, Operator'S Manual

Page: 62 / 226

1. OPERATIONAL OVERVIEW
1-48
5. Press the right button to finish the operation.
1.35.9 How to prevent sea clutter in true trails
You can prevent the display of sea clutter in true trails about your ship to clear the ra-
dar picture. Your ship's trails can also be shown or hidden.
1. Select the [TRAIL] box at the bottom-right corner of the screen, then press the
right button to display the [TRAIL MENU].
2. Select [OS TRAIL], then press the left button .
3. Select [OFF], [1] or [2] as appropriate, then press the left button .
4. Close the menu.
1.35.10 Select the Trail Length
You can select the trail length. The trail times differ from
1. Press the CURSOR ON/OFF key when the cursor is not shown.
2. Move the cursor onto the [TRAL] box, then press the right button to open the
[TRAIL MENU 1/2].
3. Select [NEXT], then press the left button .
4. Select [TRAIL LENGTH], then press the left button .
5. Select the tail length desired, then press the left button .
You can select trail length among Normal, 12H, 24H or 48H.
Note: When the trail length is changed, current trails are erased and trail box
shows [OFF].
6. Close the menu.
1.35.11 How to hide the land trails
You can hide the land trails and clear the radar pictures.
1. Press the CURSOR ON/OFF key when the cursor is not shown.
2. Move the cursor onto the [TRAIL] box, then press the right button to open the
[TRAIL MENU 1/2].
3. Select [NEXT], then press the left button .
4. Select [HIDE LAND TRAILS(T)] or [HIDE LAND TRAILS(R)], then press the left
button .
5. Select [OFF], [1] or [2] as appropriate, then press the left button .
6. Close the menu.
Option Show own ship’s trail Prevent sea clutter in true trails
[OFF] No No
[1] Yes Yes
[2] No Yes
Option
Still target trail
Moving target trail
Large target Small target
[OFF] Yes Yes No
[1] No Yes Yes
[2] No No Yes