Furuno FAR-1416, Operator'S Manual

Page: 180 / 226

6. DATA SAVE AND READ
6-8
6.3.4 Reload the data from USB flash memory
To reload the data from USB flash memory to internal memory, do the following pro-
cedure.
1. Insert the USB flash memory to the USB port.
2. Press
STBY/TX key to change to st-by mode.
Following procedures are not enabled at TX mode.
3. Open the [MAIN MENU].
4. Select [MEMORY REC./PLAY.], then press the
left button .
5. Select [USB MEMORY PLAYBACK], then press the left button .
6. Select the item to save, then press the left button .
7. Select [ADD] or [OVERWRITE], then press the left button .
[ADD]: adds data onto present data.
[OVERWRITE]: overwrites ontopresent data.
Note: The addition of mark/track has a limit of 30,000 points. If the number of mark
reaches the limit, the earliest mark data is overwritten.
8. Repeat the step 5 and 6 for other data loading.
9. Select [SEL DATUM], then press the
left button .
10. Select [WGS-84] or [TOKYO], then press the left button .
In generally, default setting WGS-84 is available.
11. Select the file to load from the data selection list.
The confirmation message “LOAD FILE. ARE YOU SURE?” appears.
12. Select [RUN], then press the left button .
A message informing you that the load is in progress is displayed, followed by a
confirmation that the load process is complete. However the screenshot data is
large, it takes more time for storage.
13. Confirm the message, then press the left button .
USB MEMORY PLAYBACK
PLAY OWN TRK
PLAY OTHER TRK
PLAY MARK/TRACK
PLAY ROUTE/WPT
SEL DATUM
UPLOAD SETTING
: ADD NO
: ADD NO
: OVERWRITE ADD NO
: OVERWRITE NO
: WGS-84
TOKYO
: OVERWRITE NO
: 1037 /30000
: 0 /10000
: 32 /10000
: 16 /10000
: 0 /10000
: 6 /30000
OWN TRK
OTHER TRK (CONS)
OTHER TRK (AIS)
OTHER TRK (TT)
OTHER TRK (GPS BUOY)
MARK/LINE CURRENT USAGE
TURN WHEEL : SELECT PRESS LEFT BUTTON : ENTER
PRESS RIGHT BUTTON : CLOSE
SELECT THE FILE TO RECORD
DATA SELECTION
FILE NAME
201607231746 SEL PAGE_
OWN TRK OTR TRK MARK WPT ROUTE
5370 0 0 0 0